Long Sweep 90 degree Bends for 6" PVC

Started by banderton, April 18, 2016, 04:42:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

banderton

April 18, 2016, 04:42:28 PM
Does anyone know a source for 6" PVC 2.0 or 2.5 R/D 90 degree bends for SDW pipe (6.275" OD)?  I've found metal long sweep 90s but not PVC.  Thanks in advance.  If I can't find any I may take a stab at making some.

Print
Go Up Pages1
User actions