Are there any recommendations for the on the following?
Intake and outlet size - I am using a vacuum with 2.5" hose. I'm guessing going larger will slow down the velocity?
Distance from lid to baffle.
Distance from baffle for the bottom of the outlet.
What is preferred, Inlet coming in from the top with an elbow in the air path or the inlet coming in from the side and flush with the side.
Videos show 2 different inlets. Round PVC attached to the side of the separator or round PVC going into a square chamber that is attached to the side of the seperator?
I have seen 2 different baffles. Slot cut away from the wall or slot cut all the way to the wall. pictures are attached. Is there a reason to use one over the other.
Thank you!
Intake and outlet size - I am using a vacuum with 2.5" hose. I'm guessing going larger will slow down the velocity?
Distance from lid to baffle.
Distance from baffle for the bottom of the outlet.
What is preferred, Inlet coming in from the top with an elbow in the air path or the inlet coming in from the side and flush with the side.
Videos show 2 different inlets. Round PVC attached to the side of the separator or round PVC going into a square chamber that is attached to the side of the seperator?
I have seen 2 different baffles. Slot cut away from the wall or slot cut all the way to the wall. pictures are attached. Is there a reason to use one over the other.
Thank you!