Hi Im Todd. I have actually already built 2 Thein baffle systems so far. Well One and modified my Luguna DC16 with a Thein baffle. Both work very well but are both Shop vac systems. I have been wanting to put together a system that has more volume. My Small units are not supplying enough to pull from my Table saw at all. So I am going to work on a bit of a system upgrade in my shop. I am going to do a full modified Harbor Freight 2 HP system. For most of my shop my small 2.5" pipe system has done a decent job I want to improve on what I have so No I am doing a bit more digging on some sizing. I have been batting around using a 20 gal steal trash can but I am slowly moving away from that and leaning more towards a 55gal fiber or plastic drum set up. I am not 100 Percent sure on my actual runs yet I am thinking I will probably have 3 drops in my system 2 for equipment and one for a floor sweep.
My overall equipment consist of 10" table saw, 14" bandsaw, 1meter X1.8meter CNC Router, 10" Miter saw, 10" Radial arm saw, 13" Lunchbox planer,17" Drill press, 4" belt/6" disk sander and a Spindle Sander. The only real stationary equipment is my Miter and Radial Arm saw witch share the same bench and Drill press.. All of my other equiment is on wheels for the most part so they can be moved around when I need build space and such. Right now I have zero dust collection around my drill press so I am leaning towards my one floor sweep drop being near my drill press.
My overall equipment consist of 10" table saw, 14" bandsaw, 1meter X1.8meter CNC Router, 10" Miter saw, 10" Radial arm saw, 13" Lunchbox planer,17" Drill press, 4" belt/6" disk sander and a Spindle Sander. The only real stationary equipment is my Miter and Radial Arm saw witch share the same bench and Drill press.. All of my other equiment is on wheels for the most part so they can be moved around when I need build space and such. Right now I have zero dust collection around my drill press so I am leaning towards my one floor sweep drop being near my drill press.