hi there
is anybody using those 6"-4" transition boxs that clear view sell. they are a clear box (or clear front anyway) with a 6" port on the top and 2 4" on the bottom
i am thinking of adding something like this to the duct lines going to my table saw and band saw. it should help me see whats going on in side
thanks alan
i take it nobody has these
i dont think i will bother. they will create too much losses to be worth it.
i am thinking of getting a short piece of 4" clear pipe and putting 6" of it before the flex hose. then i can see if the dust is moving properly
That is a good idea.
I use 2.5" clear pipe for almost all my DC. It is really pretty thin stuff, though. I priced thicker stuff once, it was real expensive.
Maybe you can find a deal on a short piece of 4" clear?
axminister (tool shop in uk ) sell a 4" set of clear pipes fittings etc . you can buy extra pipes to add to the set. i might get one and see what happens.
they also sell a 63mm set . im thinking of running that around the shop as well for my smaller machines (disk sander , router table) and hand power tools
so its back to building a smaller scale seperater