Hey,
I'm doing the same conversion as TimmyG and I wanted to know far how up in the barrel should mount the baffle. I hope that this project lives up to it's reputation. I'll keep you all updated But I owe all of the credit to TimmyG.
The baffle is typically placed about 1/2" to 1" below the inlet.
Thank You Phil,
First I'd like to say that I am glad to find a place were everybody is friendly and has no problem sharing info about projects.
I have started to make a similar set up as TimmyG, but I'm using a 55 gallon drum under the DC barrel. I have cut most of the pieces to set everthing in place so it all fits together. I've cut a ring of MDF to fit around the barrel, A second piece will go between the drum and the DC barrel, The third piece will go around the DC Barrel. I did this so it all fits together nicely. I will post some pics as soon as I get it done. I was wondering if someone could let me know how to post pics on here.
I do have one more Question, I am looking for about 4ft of 6" flexable duct (Preferably clear). If someone has some laying around their shop can you please let me know. I am willing to pay for it.
Thanks Again for the info and Hospitality
I use http://photobucket.com/ its free and easy to use.
hint , use the image code for forums.
cheers :)