Text only | Text with Images

J. Phil Thien's Projects

General Category => Thien Cyclone Separator Lid Discussion => Topic started by: f6dragonrider on April 22, 2009, 06:59:59 PM

Title: Pics of new separator
Post by: f6dragonrider on April 22, 2009, 06:59:59 PM
http://s295.photobucket.com/albums/mm134/97phatlady/

I hope this worked.
Title: Re: Pics of new separator
Post by: bennybmn on April 23, 2009, 12:13:44 PM
Nice cradle!!

On your little cart, you could raise that vac up and shorten the connector hose if you wanted, might help the cause a little.
Title: Re: Pics of new separator
Post by: toolguy1000 on April 23, 2009, 07:01:48 PM
very nice execution.  good luck with the separator.
Title: Re: Pics of new separator
Post by: Greg McCallister on April 24, 2009, 04:46:00 AM
Nice job!!!
Title: Re: Pics of new separator
Post by: rhossack on May 17, 2009, 02:02:44 PM
>http://s295.photobucket.com/albums/mm134/97phatlady/
>I hope this worked

Worked good enough for me to want one of those ZEP cans ... have to check the oil distributers around here and see if they have a small one like that.
Title: Re: Pics of new separator
Post by: Vaughn on May 20, 2009, 02:55:57 AM
Same here. That would be a handy size.

Kudos f6 on the separator and the cart. Nice job.
Text only | Text with Images