now that i understand the baffle set up, and my shop vac is equipped with a dry wall bucket separator with a thien baffle, i want to add something to my DC. should i:
1) add a baffle to the DC (delta ap 400, not really sure how to do this given its configuration) or
2) create a separate separator for the same DC. if yes to (2), what size pail/receptacle would work well with 4" fittings (20 or 30 gal)?
possibly phil could offer an opinion regarding choosing one of the above two alternatives. thanks.
I think w/ a 1-HP DC I wouldn't want to take the "hit" of a separator. I'd rather add the baffle to the DC's ring. But I think that can be tricky on the 400 from Delta.
i agree. which leaves me with a separator. what size garbage can would be best with 4" hoses and filltings-20 or 30 gal?
30 would be much better. No worry of collapse w/ DC.
For what its worth:
I just completed my setup. I have a HF, 2 HP blower mounted to the wall. I have a Thein Seperator in the top of a 20 gal. trash can. My 4" piping goes directly into the side of the can, and the exhaust goes through 15' of insulated flexible duct to a 1 micron filter hanging up high on the wall. Seems to be working great! After a little more testing I'll post pictures.