General Category => Thien Cyclone Separator Lid Discussion => Topic started by: banderton on April 18, 2016, 04:42:28 PM
Title: Long Sweep 90 degree Bends for 6" PVC
Post by: banderton on April 18, 2016, 04:42:28 PM
Does anyone know a source for 6" PVC 2.0 or 2.5 R/D 90 degree bends for SDW pipe (6.275" OD)? I've found metal long sweep 90s but not PVC. Thanks in advance. If I can't find any I may take a stab at making some.